Filter
Top Products
The TV-VIDEO Combi needs the following information for every
programmed recording:
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and stop time of the recording
* VPS/PDC on or off
The TV-VIDEO Combi stores all the information mentioned
above in what is known as a TIMER block. You can programme
up to 6 TIMER blocks, one month in advance.
’VPS’ (Video Programming System) / ’PDC’
(Programme Delivery Control)
With VPS/PDC, the TV station controls the beginning and the
length of the programmed recording. This means that the
TV-VIDEO Combi switches itself on and off at the right time
even if a TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the VPS/PDC time. If,
however, in the TV guide, in addition to a TV programme’s start
time, a different VPS/PDC time is given, e.g.: ’20.15 (VPS 20.14)’,
you have to enter ’20.14’ as the start time exactly to the
minute.
If you want to enter a time that differs from the VPS/PDC time,
you must switch off ’VPS/PDC’.
Programming with ’VIDEOPlus+’
All the information required for a programming is contained
encoded in the VIDEOPlus+ code.
a Press the SV/V+ button on the remote control.
b Please enter the VIDEOPlus+ code (up to 9 digits) printed
in your TV guide next to the start time of a TV programme.
If you make a mistake, clear with the CLEAR button.
VIDEOPLUS
CODE
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
123456 ((( ONCE
0-9 Store:
press OK
c Programming at daily or weekly intervals:
1. Press the C button.
2. Select the interval with the menu buttons A or B .
D’Mo-Fr’: Recording at daily intervals from Mondays to
Fridays inclusive.
’Mo-Su’: Recording at daily intervals from Mondays to
Sundays inclusive.
’WEEKLY’: Recording at weekly intervals on the same
day of the week.
’ONCE’: Single recording.
d Confirm with the OK button.
DThe data has been stored in a TIMER block.
e Confirm with the TIMER k button.
DMake sure that a cassette without erase protection has
been loaded.
DIf VIDEOPlus+ does not recognize the TV channel, you
must select the required programme number with the
P p button. These settings will be stored automati-
cally.
5. AUTOMATIC (PROGRAMMED) RECORDING
12