Filter
Top Products
Connecting a HiFi-stereo set
You can also connect this TV-VIDEO Combi to a HiFi-stereo set
or to a ’Dolby Pro Logic’-decoder.
DIf you connected the TV-VIDEO Combi to a ’Dolby Pro
Logic’-decoder, you can control its volume via the
TV-VIDEO Combi remote control.
To do so, switch the line ’Audio output’ in the
menu ’Setup’to’VARIAB.’.
How to read TELETEXT
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
E To store the current page, press the OK button.
The next time you call up TELETEXT, you will automati-
cally turn to this page.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 .
E Some TV channels will show a coloured bar with page
numbers at the bottom of the screen.
To call up one of these pages, press one of the coloured
buttons ( CLEAR , SMART , SMART # , AUDIO ).
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
E To enlarge the print, select the symbol ’…•’ and confirm
with the OK button.
E To switch off the TELETEXT decoder temporarily, select
the symbol ’…•X’ and confirm with the OK button.
E To call up a TELETEXT sub-page:
a Select the symbol ’/00’ and confirm with the OK
button.
b Enter the page number of the sub-page with the
0-9 -buttons.
E To call up concealed information, select the symbol
’…•?’ and confirm with the OK button.
E To stop the pages from being turned over, select the
symbol ’STOP’ and confirm with the OK button.
Switching the remote control command
If you have two video recorders with the same remote control
command, you can change the remote control command of the
handset and the remote control command of one of the
TV-Video Combi’s.
a Select the line ’VCR 1/2’ in the menu ’Setup’.
b On the remote control, press the STOP h button and the
digit button 2 at the same time to switch the remote
control to ’VCR 2’.
DIf you want to switch back to ’VCR 1, press the
STOP h button and the digit button 1 at the same time.
c Confirm with the STOPh button.
DAfter you changed the batteries in the remote control, it
will switch back to ’VCR 1’.
6. ADDITIONAL FUNCTIONS
14