Filter
Top Products
41
06
07
08
09
06
07
08
09
07
08
09
1
4
2
PIP
CC
PROG. LIST
CLOCK
A/CH
TV/VCRSLEEP
SOURCE
FORMAT
AUTO
ACTIVE
AUTO
SOUND
CONTROL
PICTURE
MENU SOUND
SURR.
VOL
CH
MUTE
PC
TV
HD
RADIO
1
23
456
789
0
STATUS/EXIT
SURF
TV
DVD
ACC
POSITION
3
3
Y
our TV remote can be set to work various
external devices such as VCRs, Cable
Boxes, Satellite Receivers, DBS, DVD, etc. by
what is called the search method of remote
control programming.
If the “Remote Code” number method shown
on the previous page did not set your remote
to work your external device, then follow the
easy steps listed below.
Please read steps 1-4 before beginning.
1
Press the POWER button on the
device your are attempting to program
to turn it ON.
2
Place the TV/DVD/ACC Mode
Switch in the proper position.
3
Press the • RECORD and the AUTO
SOUND buttons simultaneously and
hold them down. The remote will con-
tinue to send programming codes, one
ever 1.5 seconds.
4
The device will begin to change chan-
nels after the remote identifies the cor-
rect code. When the channels start to
change release the • RECORD and
AUTO SOUND buttons. The remote
should be ready to operate the device.
REMOTE C
ONTROL USE WITH ACCESSORY DEVICES - SEARCH METHOD
This method can take several minutes to per-
form.
Don’t let the device scan up more than five
channels. If you do the remote may pass up
the right code and another search cycle will
have to be repeated.
If no channel change happens within two
minutes, repeat steps 1-4. Should a channel
change still not occur, the remote will not
work the desired device.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
HELPFUL HINT
Cable Converter
Satellite Receiver
VCR