Filter
Top Products
- 5 -
In the Channel Install sub-menu, program settings can be set. When this menu is displayed, all the protections
are inactive.
In the Configuration menu, various settings and features of the TV can be adjusted.
•
Switch On/OSD: In this sub-menu the behavior
of the TV after switching on and the behavior of
the On Screen Display can be selected.
• Picture/Sound: In this sub-menu, the Picture and
Sound settings of the TV can be selected.
• Security: In this sub-menu, the Security settings of
the TV can be configured.
• Control: In this sub-menu, the Control settings of
the TV can be configured.
• CC/V-Chip: In this sub-menu, the Close Caption
and V-Chip settings of the TV can be configured.
• Channel: The Channel number can be selected
with the CH+/- buttons.
• Input:
The "Input" menu item selects the desired
input source that will be assigned to the channel.
Possible values are TUNER, AV2, S-VIDEO,
SIDE AV, SIDE S-VIDEO, CVI-1, CVI-2 (HD-
A), PC-D, PC-A, and HD-D. Some input sources
may not be available on certain sets.
• Ring 1: This menu item allows toggling between
Saved and Deleted for Channel Ring 1
• System: This menu item allows toggling between
different TV transmission systems. The options
are AUTO, NTSC, PAL-M, and PAL-N.
• Label: This menu item will be used to add a label/name for each channel.
o
By pressing the left/right buttons you may enter or exit the label field; by pressing the up/down cursor
you may insert alphanumeric characters.
o Pressing the Menu button lets you exit the “Label” menu item.
• Mute: This item enables/disables picture and sound for the particular channel.
o NONE: normal picture and sound enabled
o VIDEO: picture is blanked for this channel
o AUDIO: sound is muted for this channel (e.g. information channel)
• Auto Install TV: This menu item initiates the automatic frequency searching of TV channels. Inside the “Auto
Install TV” sub-menu, select Start to begin frequency searching. (*Note: In some LCD TV models, the TV screen
may go completely blank for a short period of time, or there may be some brief flashing of images on the screen, while the TV is
searching for channels to install. This is normal behaviour of the TV set. When all TV channels have been successfully stored, the
first stored channel will then be displayed).
• Ring 2/Ring3/Ring 4: This menu item allows toggling between Saved and Deleted for Channel Rings 2/3/4.