Filter
Top Products
• Switch On Pic Fmt: This item sets the television’s Picture Format at switch on. Use the
Right/Left key to select the desired format.
• Power On: The Power On menu function defines the behavior of the television whenever
AC Power is applied. The available options are "FORCED ON", "LAST STATUS" and
“STANDBY”.
o FORCED ON: TV will be automatically switched to ON mode whenever the
mains power is turned ON or resumed after a power interruption. Note that the
remote control STANDBY key will no longer function when TV is set in this
mode. TV can only be switched OFF by means of the main switch or a set-up
remote control or by ESP function (Energy Saving Programmability controls the
maximum continuous viewing time allowed).
o LAST STATUS: TV will be automatically switched to the last status (either
STANDBY or ON) whenever the mains power is turned ON or resumed after a
power interruption.
o STANDBY: TV will be automatically switched to STANDBY mode (even if the
last status was ON) whenever the mains power is turned ON or resumed after a
power interruption.
• Volume Indicator: To display volume indicator when adjusting volume, select "YES".
Select “NO” to hide the volume indicator.
• Channel Display: Channel Display values can be: Number, Label, All, None.
• Digit Timeout: This is the time-out to enter the second digit of program number, eg for
program number 10 and above.
In this sub menu, the Picture and Sound settings of the TV can be selected.
•
Brightness: This changes picture
brilliance.
• Colour: This changes the intensity
of the colour.
• Contrast: This changes the
difference between the light and
dark tones.
• Sharpness: This changes the
picture definition.
• Tint: This allows adjustment of
colour hue to obtain natural skin
tones.
• Active Control (* menu option
only available in certain models):
Active Control function optimises
the quality of the picture according
to the quality of reception
- 9 -