Filter
Top Products
5.5.1 EasyLink 1/2
If a device is equipped with the HDMI-CEC standard, the
device and the TV can work together.
Connect the TV to the device using an HDMI cable. The
TV comes with EasyLink set to On. To switch EasyLink off,
press h > Setup > Installation > Preferences > EasyLink.
With EasyLink, the following functions are available:
• One touch play
Insert a disc and press Play on the device. The TV switches
on from standby mode and shows the disc programme
automatically.
• System standby
Press O on the TV remote control for 2 seconds to switch
the connected devices into standby mode.
...
Downloaded From TV-Manual.com Manuals