Filter
Top Products
L
PrH
R
PbV
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV 2
AV 3
AV 1
VIDEO
L
R
VIDEO
AV1
ANTENNA
75
o
Cable box
IN
CABLE
OUT
2
AV1 :
L + R + VIDEO
Connect a satellite receiver or Cable box with A/V outputs
EN
44
1. Connect the satellite antenna cable or the Cable TV cable 1 to the satellite receiver’s or cable
box’s
IN jack.
2. Connect another RF cable 2 from the output
OUT of the satellite receiver or cable box to the
TV’s
CABLE/ANTENNA 75 Ω x jack.
3. Connect the Video,Audio left and right AV cables 3 to the
VIDEO, L and R audio input jacks of
AV1.
4. Select the equipment you have connected in the Setup menu, Select your source, p. 22 and link
it to the
AV connector you have connected your equipment to.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your satellite receiver or cable box has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO input of AV1 and connect
the audio cables to the
AUDIO L and R input jacks of AV1.
When using the S-VIDEO connector do not connect any device to the AV1 VIDEO jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.