Philips 42HFL3381/97 Flat Panel Television User Manual


  Open as PDF
of 36
 
8
Display a welcome message
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On Settings]
>[Display Msg].Selectoneofthefollowing
options:
• [Off]
(Off):Disablesthedisplayofa
welcomemessage.
• [On](On):Enablesthedisplayofawelcome
messageforapre-denedperiodoftime
(see‘Setawelcomemessage’onpage8).
3 Press toreturntothepreviousscreen.
Set a welcome message
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On Settings]>
[Welcome Msg].Selectoneofthefollowingto
setorclearawelcomemessage:
• [Line 1](Line1):Press toenterthe
rstlineofthewelcomemessage.
• [Line 2](Line2):Press toenterthe
secondlineofthewelcomemessage.
• [Clear](Clear):Clearsthewelcome
message.
• [Msg Timeout]
(Messagetimeout):Setthe
displaytimeto20,25or30seconds.
3 Press toreturntothepreviousscreen.
Tip
• Youcanhaveamaximumof20alphanumeric
charactersineachlineofyourwelcome
message.
Set ID
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On Settings]>
[Set ID].
3 Press toadjusttheIDtoanumberbetween
0-63.
4 Press toreturntothepreviousscreen.
Note
• Availableonlyinpublicsignageapplications.
Preset the picture format
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On
Settings]
>[Picture Format].
3 Press toselectoneoftheavailable
pictureformats.
4 Press toreturntothepreviousscreen.
Preset the power mode
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On
Settings]
>[Power On].Selectthe
powermodethatisusedwhentheTVis
switchedonfromthemains:
• [Standby](Standby):TheTVis
switchedoninstandbymode.
• [On](On):TheTVisswitchedon.
• [Last Status](Laststatus):TheTVis
switchedontothelastusedpower
mode.
3 Press toreturntothepreviousscreen.
Use Smart power
Smartpowerenablesyoutodisplaypicture
withsignicantpowersavingswithout
compromisingthepicturequality.
1 EnterthePBSsetupmenu.
2 Press toselect[Switch On
Settings]
>[Smart Power].Selectoneof
thefollowingoptions:
• [Off](Off):DisablesSmartPower.
• [Low](Low):Displaysthepicture
withleastpowersavings.
• [Medium](Medium):Displaysthe
picturewithmediumpowersavings.
• [High](High):Displaysthepicture
withmaximumpowersavings.
3 Press toreturntothepreviousscreen.
EN
 previous next