Philips 42HFL3381/97 Flat Panel Television User Manual


 
15
Guest RC does not work
The guest remote control does not work:
Checkthattheremotecontrolisnot
locked.Select[Control Settings]>[RC
Lock]
>[Off]toenabletheremote
control.
Contact us
Ifyoucannotresolveyourproblem,referto
theFAQsforthisproductatwww.philips.
com/support.
Iftheproblemremainsunresolved,contact
PhilipsConsumerCareinyourcountryas
listedintheAddendum.
Warning
Donotattempttorepairtheproductyourself.
Thismaycausesevereinjury,irreparable
damagetoyourproductorvoidyour
warranty.
Note
MakeanoteofyourTVmodelandserial
numberbeforeyoucontactPhilips.These
numbersareprintedonthebackoftheTV
andonthepackaging.
5 Troubleshooting
Thissectiondescribescommonlyencountered
issuesandaccompanyingsolutions.
Picture issues
The TV is on, but there is no picture:
Checkthatthe[Blank Channel]feature
isdisabledinthePBSsetupmenu.Select
[Blank Channel]>[Off]toenable
picturedisplayontheTV.
PBS feature inactive
The PBS mode is not active:
CheckthatthePBSmodehasbeen
activatedbyselecting[PBS Mode]>
[On].
SavetheTVsettingsandturntheTVoff
andonagain.
No access to PBS setup menu
The PBS setup mode cannot be accessed using
the guest remote control:
Checkthatthehigh-securitymodehas
beenturnedoff.UsethePBSsetup
remotecontroltoselect[Control
Settings]
>[High Security Mode]>
[Off].
The PBS setup mode cannot be accessed using
the PBS setup remote control:
Checkthattheswitchatthesideof
thePBSsetupremotecontrolissetto
SETUP.
English
EN