Filter
Top Products
24
Connecting Peripheral Equipment
Setting the AV4 and AV5 Colour Space
The term colour space refers to how colours are defined and
appear on your TV. When making connections to the AV4 or
AV5 sockets, you will need to be sure the TV’s colour space is set
to match the output of the peripheral you have connected.
Press the AV key on the remote control as many times as
necessary to select the high-definition input you desire, AV4 or
AV5.
Press the MENU key to display the menu.
Select INSTALL with the cursor down.
Press the cursor right to enter the INSTALL menu.
Cursor down until the high-definition input (AV4 or AV5) is
selected.
The current colour-space setting appears to the right of AV4
or AV5. To change the setting, cursor left or right.
Press the OSD key to switch the menu off.
Selecting Connected Equipment for Viewing
Equipment Connected with an Aerial Cable
Only
Select the channel number under which you have stored the test
signal with the digit keys.
Equipment Connected to the back or to the
side of the TV (AV3)
Press the AV key repeatedly to select AV1, CVI, AV2, AV3, AV4
or AV5 according to where you have connected your equipment
at the back or the side of your TV.
Select CVI to view the playback of DVD discs if you used the
INPUT-AV 1 component video input sockets (Y-Pb-Pr and
AUDIO L [mono] and R inputs).
TV Channels
Enter the channel number of the TV channel you want to watch
with the digit or CH +/– keys.
AV