Philips 47PFL7456T TV Antenna User Manual


 
DLNA , the DLNA Logo and DLNA
CERTIFIED
are trademarks, service marks
or certication marks of the Digital Living
Network Alliance.
HDMI, the HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC
in the United States and other countries.
Kensington and Micro Saver are registered
US trademarks of ACCO World corporation
with issued registrations and pending
applications in other countries throughout the
world.
All other registered and unregistered
trademarks are the property of their
respective owners.
SDHC Logo is a trademark of SD-3C, LLC.
Declaration of Conformity
Hereby, Philips Innovative Applications N.V.
declares that this television is in compliance
with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity is
available at: http://www.philips.com/support
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
EMC regulation
In order to maintain conformity to the
Electro Magnetic Compatibility (EMC)
directive (2004/108/EC), the mains plug
on this product must not be detached
from the mains cord.
If the apparatus does not recover in
DLNA/Net TV mode, user intervention
is required.
Mains fuse (UK only)
This TV is tted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Ret the fuse cover.
Copyright
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
®
12nc
3104 315 7671.1
date
April 26, - 2010
name
Bob Vranken
product
UK Switch Over
leaflet
Recto
format / dimensions
sheet 148x210mm
material
paper 70 gr. satin
(maximum)
colours
- black
UFD
Brugge
148
Verso
Information about how to
re-tune your TV during the
digital TV switchover.
Info for UK only.
Television in the UK is going digital, bringing us
all more choice and new services. Starting in
late 2007 and ending in 2012, television
services in the UK will go completely digital, TV
region by TV region.
Please see the next page to find out when your
area switches to digital.
Digital UK is the independent, non-profit
organisation leading the process of digital TV
switchover in the UK. Digital UK provides im-
partial information on what people need to do
to prepare for the move to digital, and when
they need to do it.
How the switchover affects
your TV equipment:
Your new TV has a digital tuner built in, which
means it is ready to receive the Freeview signal
by simply plugging it into your aerial socket
(check if you can get digital TV through your
aerial now, or whether you’ll have to wait until
switchover, at www.digitaluk.co.uk).
When the TV switchover happens in your area,
there are at least two occasions when you will
need to re-tune your TV in order to continue
receiving your existing TV channels, and also to
pick up new ones.
*
*
Digital UK, the body leading the digital TV
switchover, will advise you when you need to
re-tune during the switchover.
If you do not re-tune your channels when
advised to do so by Digital UK, you may lose
some or all of your channels until you do
re-tune. You should re-tune your TV every
few months to check for any new channels.
If you choose to connect your TV to satellite or
cable with a digital box then it will not be
affected by switchover, and you won’t need to
re-tune.
If you have any questions, please contact your
equipment supplier or call Digital UK on …
0845 6 50 50 50 or visit www.digitaluk.co.uk
How to re-tune:
1. Press h on the remote control.
2. Select Setup and press OK.
3. Select Search for channels and press OK.
4. Select Reinstall channels and press OK.
5. Select your country (UK) and press OK.
6. Select Antenna DVB-T and press OK.
7. Select Start and press OK.
The installation can take several minutes.
When the installation is complete, press OK.
Your TV is now retuned.
If you are missing any channels, it may be
that they are not available in your area, or
that your aerial needs upgrading.
When does switchover happen?
Calls charged at BT rate of 3p per minute daytime and
1p per minute evenings and weekends. Rates may vary
for calls from non-BT lines.
Visit us at digitaluk.co.uk
Call us on 0845 6 50 50 50
Copeland switches on October 17, 2007
The exact date you switch
depends on the transmitter
you are served by. To check
when you switch, go to
Digital UK’s postcode
checker on
www.digitaluk.co.uk
Check your ITV news service
or look at Teletext page 106
to see what TV region you’re
in.
20100422
Downloaded From TV-Manual.com Manuals