Filter
Top Products
10
Switch on and set up the TV
The TV turns on automatically after the power cord is inserted into the
power connector. The following screen appears:
Follow the on-screen instructions to select your language and complete
your TV setup.
Note
• If you connect your TV to a cable box or satellite set-top box, you do not need to install
channels. Press the red button on the remote control to exit this stage of the setup.
Finish the setup by selecting your location:
• If you choose [Retail store] your settings are erased each time you
turn off the TV. Use this mode for retail store displays only.
• If you choose [Home] you are guided through a choice of picture
display options. Press the left or right cursor buttons to select your
preferred screen.
Press the GREEN button on your remote control to proceed.
Thank you for your purchase of this PHILIPS TV.
Please proceed with the following steps to set up your TV. For
the BESTpossible picture performance, contact your local
Cable / Satellite signal provider for High Definition signal
options available in your area.
Next
EN