Filter
Top Products
26
VOL
3
5
VIDEO
AUDIO
RL
1
2
VIDEO
AUDIO
AUDIO
L
R
3
3
USING THE
SIDE INPUT JACKS AND THE HEADPHONE JACK
For your convenience, Audio/Video
Input jacks have been located on the
side of the TV cabinet. These jacks are
for use with camcorders or rental
devices that are only to be connected
for a short period of time. There also is
a headphone jack located on the front
of the TV when you’re wanted to watch
TV while others in the room do not.
Connect one end of the yellow
VIDEO CABLE to the Side VIDEO
jack on the side of the TV. Then con-
nect one end the AUDIO (red and
white) CABLES to the Side AUDIO L
and R(left and right) jacks on the side
of the TV.
Connect other end of the yellow
VIDEO CABLE to the VIDEO OUT
jack on the back of the camcorder. Then
connect the other ends of the AUDIO
(red and white) CABLES to the
AUDIO (left and right) OUT jacks on
the rear of the camcorder.
Turn the camcorder and the TV
ON.
Press the CH + or – buttons on the
remote to scroll the channels until
“SIDE” appears in the upper left corner
of the TV screen.
Now your ready to place a prere-
corded video tape in the camcorder and
press its PLAY ᮣ button
.
Let's
Look
Inside!
AUDIO IN
(RED/WHITE)
CAMCORDER
(EQUIPPED WITH
AUDIO/VIDEO JACKS)
VIDEO CABLE
(YELLOW)
BACK OF
CAMCORDER
SIDE OF TV
VIDEO
AUDIO
L
R
A Headphone Jack is located on the side of the TV.
Using the Headphone Jack will MUTE
the television’s sound.