Filter
Top Products
English
Before Operation - VCR part
13
To set the colour system
1
Press SYSTEM MENU.
2
The main menu will appear on the TV screen.
3
Press 1 or 2 to select the SYSTEM and press OK.
4
Press 3 or 4 to select according to the COLOUR
system used.
5
Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
6
Press SYSTEM MENU to remove the menus from the
TV screen.
TV with RF Antenna Input only
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.
If you have used a
SCART lead you will not have to
tune your TV, simply select the AV channel.
The AV channel is already pre-tuned for optimum video
playback on your TV.
Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.
1
Turn on DVD+VCR and TV.
2
Tune your TV until you see the picture below
(refer to your TV owners manual).
If the picture is snowy, move to step 4.
If the picture is clear, move to step 3 and press
11
on
the DVD+VCR to finish.
3
Press OK to start the automatic tuning process.
4
Press
11
on the remote control to enter the standby
mode (the clock indicator will be dimmed).
5
Press and hold CHANNEL 3 or 4 on the DVD+
VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
6
If the picture is still snowy, press
CHANNEL 3 or
4
on the DVD+VCR to set the video channel to a
vacant position between 22 and 68 which is not
occupied by any local station in your area
.
Note
The RF channel will not change until step 7 has been
executed.
7
Press
11
to store the new RF video channel into the
DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 5, do not retune your
TV.
i
RF CHANNEL 36
SET
P
R
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM
SYS-
TEM
Dr.
VCR
NIC
DECO-
DER
+
-
AUDIO
RF I/I
RF B/G
RF D/K
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM
SYS-
TEM
Dr.
VCR
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
NIC
DECO-
DER
+
-
AUDIO
AUTO
PAL
MESECAM