Philips BDP2105/F7 Blu-ray Player User Manual


 
22 EN
5 Update software
Before you update the software of this player,
check the current software version:
Press
, and then select [Setup] >
[Advanced] > [Version Info.], and press
OK.
Update software via the
Internet
1
Connect the player to the Internet (see
“Set up a network”).
2 Press , and select [Setup].
3 Select [Advanced] > [Software Update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1
Check the latest software version on www.
philips.com/support.
Search for your model and click on
“Software and drivers”.
2 Download the software into a USB storage
device.
a Unzip the download, and make sure
that the unzipped folder is named
“UPG_ALL”.
b Put the “UPG_ALL” folder in the root
directory.
3 Connect the USB storage device to the
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software Update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.