Philips BDP3010 DVD Player User Manual


 
7EN
EN
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1. Disc tray
Place a disc when opening the disc tray.
2. A(open/close) button*
Press to open or close the disc tray.
3. Infrared sensor window
Receive signals from your remote control so that you
can control the unit from a distance.
4. Display
Refer to “Front Panel Display” on page 10.
5. C(stop) button
Press to stop playback.
6. B(play) button*
Press to start or resume playback.
7. Q(standby-on) button
Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
Press and hold for 10 seconds to shut down the unit.
This button lights up in red when the unit is in
standby mode and turns off when the power is on.
8. SD card slot
Insert an SD Memory Card and play back the
contents in it.
1. AC power cord
Connect to a standard AC outlet to supply power to
this unit.
Unplug this cord from the AC outlet to completely
turn off the unit.
2. LAN terminal
Use to connect a telecommunications equipment
with LAN cable.
3. HDMI OUT jack
Use to connect to a display with an HDMI compatible
port with an HDMI cable.
4. AUDIO OUT jacks
Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA audio cable.
5. COMPONENT VIDEO OUT jacks
Use to connect a TV monitor with component video
inputs with an RCA component video cable.
6. DIGITAL OUT (COAXIAL) jack
Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio coaxial
cable.
7. VIDEO OUT jack
Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
Front Panel
71
2*
4 5 6*3
8
Rear Panel
LAN
HDMI OUT
L
Y
P
R
/C
R
P
B
/C
B
R
COAXIAL
COMPONENT
VIDEO OUT
AUDIO
OUT
VIDEO
OUT
DIGITAL OUT
PCM/BITSTREAM
3
2
5
6
1
4
7
Note
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have the RF modulator.
Introduction Connections Basic Setup Playback OthersFunction Setup