Filter
Top Products
21
[Network Installation]
Install the network connection.
[View Network Settings]
Display the information for the current network
status.
[View Wireless Settings]
Display the information for the current Wi-Fi status.
If the current network is not set to a wireless
connection, this feature is de-activated.
[Net TV User Location]
Select the location of the Philips server which
provides Net TV services.
[Clear Net TV Memory]
Clear the cookies, history, data you input for Net
TV which are stored in the cache area of the web
browser.
EasyLink setup
1 Press .
2 Select [Setup], and press OK.
3 Select [EasyLink Setup], and press .
4 Select an option, and press OK.
5 Select a setting, and press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press • .
[EasyLink]
This product supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press (standby) to turn on this
product, the TV (if the TV supports one-touch
play) automatically turns on and switches to the
video-in channel. Disc play starts if there is a disc in
this product.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
One Touch Play
EasyLink
One Touch Standby
On
On
On
Video Setup
Advanced Setup
Audio Setup
Network Setup
Preference Setup
EasyLink Setup
[Speaker Setup]
Optimize the surround output for the connected
speaker system.
• [Speaker Setup] - Activate the test tone for
the speakers and the subwoofer.
• [Speaker Distance] - Set the delay time for
the speakers and the subwoofer if they are
placed closer to the listening position, so that
the sound output from all speakers reach the
listening position at the same time.
• [Speaker Volume] - Set the volume level of
the speakes and the subwoofer to get the ideal
audio balance.
• [Speaker Size]
Set the speaker size for the speakers and •
the subwoofer.
Select • [Large] size for speakers that can
produce low frequency signal below 120 Hz.
Select • [Off] if there is no speaker
connected.
If the front speakers are set to • [Small],
subwoofer setting is [On] and it cannot
be changed.
If the subwoofer is set to • [Off], the
front speakers settings are [Large] and it
cannot be changed.
Tip
The test tone is emitted from the speaker while adjusting •
the volume level.
Allow 1ms setting for every 30cm distance between the
•
speaker and the listening position.
Network setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Network Setup], and press .
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press • .
View Network Settings
Network Installation
View Wireless Settings
Net TV User Location
Clear Net TV Memory
Video Setup
Advanced Setup
Audio Setup
Network Setup
Preference Setup
EasyLink Setup
English
EN