Filter
Top Products
29
Picture Controls
Notes:
! H-Position, H-Size and V-Position adjustments are only available in RGB, DVI, and Component input modes
higher than 480i.
! When using Component inputs with Y Cb/Cr signals, H-Size, H-Position, V-Size, V-Position settings are not
available.
BRIGHTNESS
Adjust brightness to enhance the level of dark aread in the video priture such as night scenes and
shadow scenes. Increasing brightness will make dark areas more visible.
COLOUR
Use color to adjust the color saturation of the video picture. Increasing color will make the color
more intense. Reducing color setting will make the color less intense.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the cideo picture. Increasing the
setting will enhance the edges of objucts in the video picture. Decreasing the setting will reduce
enhancement.
TONE
Select the color temperature for white balance. There are three settings to choose from : Cold,
Neutral, Warm.
TINT
Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with
more green in appearance. Decreasing setting in left direction will shift the picture with more red in
appearance.
AUTO FORMAT
Use to turn on the auto format of screen or turn off. System will determine the format according to
the signal when you turn on the auto format, otherwise, the screen will remain in 16:9.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical
direction. Decrease to reduce the picture size in the vertical direction.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the
picture down.
H-SIZE
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal
direction. Decrease to redice the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease
to shift the picture to the left.
CLOCK PHASE
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under
RGB mode.