Philips CCA092AT TV VCR Combo User Manual


 
Front Panel 21
AUDIO
VIDEO
REC
POWER
REW PLAY F.FWD
REC/OTR
VOLUME CHANNEL
EARPHONE
STOP
EJECT
Screen Cover
The TV/VCR screen is protected by a removable screen
cover. If you want to remove the screen cover, slide the two
tabs that hold the cover in place, then pull off the cover.
Cassette Compartment
Insert a video cassette tape here.
POWER Button
Press to turn the power on or off.
CHANNEL o/p
Buttons
Press to scan through the
TV/VCR channels.
During tape playback,
press to adjust the track-
ing. Details are on page 46.
Press the CHANNEL o
button and the VOLUME
p button on the TV/VCR
at the same time to
display the pop up menu.
Press again to remove the
pop up menu.
STOP/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the menu.
PLAY Button
Press to play a tape. Details are on page 28.
Press to release Search or Still mode and
return to normal playback. Details are on page
41. Press to select an item in the menu.
REC(ord)/OTR Button
Press once to start a recording. Details are on
page 29. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 30.
REW(ind) Button
When tape playback is stopped, press to
rewind the tape at high speed. During play-
back, press to rewind the tape while the pic-
ture stays on the screen. Press to change a set-
ting of a pop up menu item (for example, to
adjust the BRIGHTNESS) or to return to a
previous menu.
F.FWD Button
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on the screen. Press to change a
setting of a menu item (for example, to adjust
the BRIGHTNESS) or to advance to the next
menu.
REC(ord) Light
This light appears during a recording. It flashes
slowly when the TV/VCR power is turned off
to set a timer recording. It blinks rapidly when
a recording is paused or when the power is off
for a timer recording, but there is no tape in
the TV/VCR.
Wireless Remote Sensor
Receives a signal from your remote control so
you can operate the TV/VCR from a distance.
VOLUME o/p
Buttons
Press to adjust the sound
level.
Press the CHANNEL o
button and the VOLUME
p button on the TV/VCR
at the same time to
display the pop up menu.
Press again to remove the
pop up menu.
EARPHONE Jack
Connect earphones (not supplied)
here for personal listening.
AUDIO Jack
Connect this jack to the audio out jack of a
camcorder or a VCR. Details are on page 31.
VIDEO Jack
Connect this jack to the video out jack of a
camcorder or a VCR. Details are on page 31.