Filter
Top Products
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
VCR PLUS+
SMART
SOUND
STOP
F.FWD
– +
o
o
p
p
o
p
1
2 3
4
5 6
7
8 9
0
+100
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. You can program up to
eight timer recordings. For each one, the TV/VCR will turn itself
on, record, and turn itself off automatically. Before you begin
make sure:
● The clock has been set. If not, CLOCK MUST BE SET appears.
● Channels are programmed.
● There is a tape in the TV/VCR (make sure the tape’s record tab
is intact and the tape is long enough to record the program).
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step 1.
VCR PROGRAM
1 ONCE
2 DAILY (MON - FRI)
3 WEEKLY
4 PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
2
Press the PLAY/▲ button or the STOP/▼ button to select
VCR PROGRAM, then press the F.FWD/+ button.
3
Select a once, daily or weekly recording.
● Press the Number 1 button to select ONCE. The TV/VCR will
record a TV program on any day you choose, up to 12 months
away.
● Press the Number 2 button to select DAILY. The TV/VCR will
record from Monday through Friday – starting at the same time
and recording for the same length of time every day.
● Press the Number 3 button to select WEEKLY. The TV/VCR
will record on the same day, at the same time, and for the same
length of time every week.
1
Press the MENU button to display the pop up menu.
• If the power fails, programmed
timer recordings will be lost.
• You cannot set a timer recording if
the TV/VCR is in Record Defeat
mode. To set the Record Defeat
mode to OFF, see page 40.
Helpful Hints
PRIM. SETUP
BVCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS +
1
2
3