Philips DCD322/12 DVD Player User Manual


 
21
9 Adjust settings
1 Press SYSTEM MENU.
2 Select a setup page.
3 Select an option and then press .
4 Select a setting and then press OK.
To return to the previous menu,
press
.
To exit the menu, press SYSTEM
MENU.
General setup
On the [General Setup] page, you can set the
following options:
[OSD language]
Select the preferred language for on-screen
display.
[DivX® VOD Code]
Display the DivX® registration code.
[DivX Deactivation]
Deactivate the authorization to current user.
Note
Enter this DivX registration code when you
rent or purchase a video from http://vod.divx.
com/. The DivX videos rented or purchased
through the DivX® VOD (Video On
Demand) service can be played only on the
device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the
following options:
[Digital Output]
Select audio formats supported by the
connected device.
[Off] – Turn off the digital output.
8 Adjust sound
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Select a sound effect
Note
You cannot use different sound effects at the
same time.
Select a preset sound effect
1 During play, press DSC repeatedly to select:
[FLAT] (flat)
[POP] (pop)
[JAZZ] (jazz)
[ROCK] (rock)
[CLASSIC] (classic)
Enhance bass
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC option. You can manually select the
DBB setting that best suits your listening
environment.
The feature of automatic loudness control
(LOUDNESS) enables the system to increase
the treble and bass sound effect at low volume
levels automatically (the higher the volume,
the lower the treble and bass increase).
1 During play, press DBB/LOUDNESS
repeatedly to turn on/off the DBB or
LOUDNESS feature.
[DBB]: The DBB feature is enabled.
[LOUDNESS]: The LOUDNESS
feature is enabled.
[FLAT]: Both the DBB feature and
the LOUDNESS feature are disabled.
Mute sound
1
During play, press MUTE to mute or
restore sound.
English
EN