Filter
Top Products
24
11 Product
information
Note
Product information is subject to change •
without prior notice.
Specifications
Amplifier
Rated Output
Power
2 X 30 W RMS
Frequency
Response
40 Hz - 20000 Hz, ±3
dB
Signal to Noise
Ratio
> 65 dB
Aux Input 1 V RMS 20k ohm
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Video Decoding MPEG-1 / MPEG-2 / DivX
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N > 48 dB
Audio DAC 24 Bits / 96 kHz
Total Harmonic
Distortion
< 0.8% (1 kHz)
Frequency
Response
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
S/N Ratio > 65 dBA
Activate/deactivate alarm timer
1 In the standby mode, press SLEEP/TIMER
repeatedly.
If timer is activated, »
is displayed.
If timer is deactivated, »
disappears on
the display.
Tip
Alarm timer is not available when the source is •
set as “MP3 LINK” or “AUX”.
If CD/USB/iPod/iPhone source is selected but no
•
disc is placed or no USB/iPod/iPhone connected,
the system switches to FM automatically.
Set the sleep timer
This apparatus can switch to standby
automatically after a set period.
1 When the apparatus is turned on, press
SLEEP/TIMER repeatedly to select a
preset period (in minutes).
When sleep timer is activated, »
is
displayed.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until [SLE
OFF] is displayed.
Listen to an audio device
You can listen to an audio device through this
apparatus.
1 Ensure the external audio device
is connected to this apparatus (see
“Connect” > “Connect an external audio
device”).
2 Press MP3 LINK/AUX repeatedly to select
the audio input through the MP3-LINK
socket or AUX IN (L and R) sockets.
3 Start to play the device (see the device
user manual).
Listen through headphone
1
Plug a headphone into the socket.
EN