Filter
Top Products
IN-CAR USE (CONNECTIONS SUPPLIED OR OPTIONALLY
AVAILABLE)
Only use the supplied car voltage converter (4.5 V, DC, positive
pole to the center pin) and the car adapter cassette. Any other
product may damage the set.
1 Put the RUSH on a horizontal, vibration-free and stable
surface. Make sure it is a safe place, where the player is
not a danger or obstacle to the driver and passengers.
2 Connect the DC plug of the voltage converter to the 4.5V DC
jack of the RUSH.
3 Insert the voltage converter into the cigarette lighter jack. If
necessary, clean the cigarette lighter jack to obtain a good
electrical contact (only for a 12 V car battery, negative
grounding).
4 Turn down the volume and connect the adapter cassette
plug to the p jack of RUSH.
5 Carefully insert the adapter cassette into the car radio’s
cassette compartment.
6 Make sure the cord does not hinder your driving.
7 Start the RUSH, set VOL to 8 bar and adjust the sound with
the car radio controls.
• Always remove the voltage converter from the cigarette
lighter jack when the RUSH is not in use.
Notes:
– Avoid excessive heat from the car heating or from direct
sunlight (e.g. in a parked car in the summer).
– If your car radio has a LINE IN jack, use the LINE IN jack for
the car radio connection instead of the adapter cassette.
Connect the signal lead to this LINE IN jack and the p jack
of the RUSH.
D
I
G
I
T
A
L
D
I
G
I
T
A
L
D
I
G
I
T
A
L
p
4.5 V DC
4
.
5
V
D
C
D
A
T
A
I
/O
H
O
LD
D
IS
P
L
A
Y
M
O
D
E
/
E
Q
V
O
L
U
M
E
D
E
L
E
T
E
B
O
O
K
M
A
R
K
N
O
YES
20
IN-CAR CONNECTION
English
XP SA 107/17 11-07-2000 11:11 Pagina 20