Filter
Top Products
3
2
5
8
0
Œ
1
4
7
Ë
[
”
MENU
P
Ê
·
¢
œ
Æ
‡
π
OK
3
6
9
ù
Select
Y
Ÿ
†
¢
CONTROL
-
SMART
ACTIVE
ª
SMART
K
`
VCR DVD SAT AMP CD
Remote control keys
Standby
To set the TV to standby mode.
To switch the TV set on again,
press
b,P @#or 09.
Select peripherals (p.10)
Press several times to select the
required EXT connector.
List of programmes
To display/clear the list of
programmes.
Use the <> cursor to
select a programme and the ≥
cursor to display it.
The symbol + is displayed alongside
all programmes which are locked (p.7).
NEXTVIEW:
refer to the separate booklet (only
available on certain models).
Cursor
These 4 keys are used to move
around the menus
(
<>≤≥)
.
Freeze the picture
Screen information
To display / remove the programme
number,the name (if it exists),the
time,the sound mode and the time
remaining on the timer.Hold down
for 5 seconds to permanently display
the programme number on the
screen.The volume level and the
smart control adjustments are then
displayed each time they are used.
Active Control (according to the version)
Optimizes the quality of the picture
according to the quality of reception.
Dual screen
(according to the version)
To activate/disable the display on
2 screens.The second screen
displays teletext.
Surround Sound
To activate / deactivate the surround
sound effect.In stereo,this gives the
impression that the speakers are
further apart.For models equipped
with Virtual Dolby Surround*,you
can experience Dolby Surround Pro
Logic sound effects.
Mode selector (p.11)
To activate the remote control in TV,
VCR,DVD,SAT,AMP or CD mode.
Teletext keys (p.8)
or VCR / DVD (p.11).
Teletext (p.8).
unused key.
Mute
To mute or restore the sound.
Volume
To adjust the sound level.
Programme selection
To access the next or previous TV
channel from the list of Favourite
Programmes (see p.5).
Digit keys
Direct access to the programmes.
For a 2 digit programme,enter the
2nd digit before the dash
disappears.
Sleeptimer
To select the length of time before the
set automatically switches to standby
(from 0 to 240 minutes).
16:9 Format (p.9).
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The personal position relates to
settings selected from the menus.
Menu
To call up or exit the menus.
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or,for bilingual programmes,to
choose between Dual I or Dual II.
The
Mono indication is red when in
forced position.
* Manufactured under license from Dolby Laboratories.
“Dolby”and the double-D symbols are trademarks of Dolby Laboratories.