Filter
Top Products
5
Manual store
Favourite programmes
This menu is used to store the programmes
one at a time.
& Press the
H key.
é With the cursor, select the
Install menu then
Manual store :
“
System: select Europe (automatic detection*)
or
Western Europe (BG standard),Eastern
Europe (DK standard),United Kingdom
(I standard) or France (LL’ standard).
* Except for France (LL’ standard),you must select
choice
France.
‘
Search : press ≥.The search starts.Once a
programme is found,the scanning stops and its
name is displayed (when available).Go to the
next step. If you know the frequency of the
required programme,this can be entered
directly using the
0 to 9 keys.
If no picture is found,consult the possible solutions (p.12).
( Program No. : enter the required number with
the ≤≥ or
0 to 9 keys.Example : program
1,enter
01.
§
Fine Tune : if the reception is not satisfactory,
adjust using the ≤≥ cursor.
è
Store : press ≥.The program is stored.
! Repeat steps ‘ to è for each programme to
store.
ç To quit the menus,press d.
This menu allows you to select the programmes
to be accessed with the
@ P # key.
& Press the
H key.
é With the cursor, select the
Install menu then
Favourite Progr. and press ≥.
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this
list.
“ Use the up/down cursor to select the
required programme.
‘ Use the left/right cursor to add or remove a
programme from the list.
( Run through steps “ and ‘ for each
programme to be added or removed from the
list.
§ To exit,press
d several times.
Other settings in the Install menu
& Press the H key and select the Install menu:
é
Language : to change the display language for
the menus.
“
Country : to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list,select “.. .”
‘
Auto Store :to start automatic search for all
programmes available in your region.If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly.If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p.4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language,etc.).
In this case, indicate your choice using the <>
cursor and validate with ≥.To quit or interrupt the
search, press
H.If no picture is found, consult the
possible solutions (p.12).
( To quit the menus,press
d.
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store
Sort •
Program •
Name
•
System •
Search •
Program No. •
Fine Tune •
Store •
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store •
Sort •
Favourite Progr.
Name
•
2 •