OPERATION 27
Repeat track/disc
● To repeat the currently-playing track, press REPEAT for about 1 second:
➤ REPEAT TRACK appears on the display.
● To repeat the entire disc, press REPEAT a second time for about 1
second;
➤ REPEAT appears on the display.
● To exit Repeat mode, press REPEAT a third time for about 1 second.
Repeat A-B
To repeat or loop a sequence:
● Press REPEAT A-B at your chosen starting point;
➤ A- appears on the player display.
● Press REPEAT A-B again at your chosen end point;
➤ A-B appears on the display, and the repeat sequence begins.
● To exit the sequence, press REPEAT A-B again.
Favorite Track Selection (FTS)
NOTE
Favorite Track Selection (FTS) is only available for audio disc and can only be
compiled with OSD On.To switch on or off FTS, refer to section on SETTINGS.
Compiling an FTS program
On this player, FTS programs can be compiled by selecting the tracks
you want to play (“Track Selection”) or by excluding the tracks you do
not want to play (“Excluding Tracks”)
To exclude Tracks:
1 Load a disc and go to Stop mode.
2 Press t.
3 Use the t or u key to move to the first track number you want to
exclude.
4 Press the w key.
5 Exclude further track numbers in the same way. If you change your mind,
you can re-include any track number by moving back to it and pressing
the v key.
6 To clear your whole selection and start again, press 9.
When your FTS program is complete, press 2 to start play, or RETURN
to go back to Stop mode. In either case, the FTS program will be
automatically memorized.
Audio CD Exclude Tracks
12 34 8765131211109 2
Play
7
Exclude
Play Selection Clear Selection
2
9
Audio CD
Time Tracks
1160:00
23 56789101141
Exclude Tracks Track Selection
2
2
2
OK
RETURN
i
4
3
2
1