Philips DVD950/05 DVD Player User Manual


 
English
- Black level shift (NTSC only)
Adapts the colour dynamics to obtain richer contrasts. Select ON or
OFF.
- Video shift
Factory setting is such that the video will be centered on your screen.
Use this setting to personalize the position of the picture on your TV
by scrolling it to the left or right.
- Colour settings
You can select one of five predefined sets of colour settings and one
set (Personal) which you can define yourself.
- Personal colour
Allows you to fine-tune the selected colour settings saturation,
brightness and contrast.
Sound
- Digital output
Factory setting ON means that both coaxial and optical outputs are
switched on. If you are not connecting equipment with a digital input,
change the setting to OFF.
If your equipment doesn't include a digital multi channel decoder, set
the digital output to PCM (Pulse Code Modulation). Both coaxial and
optical outputs are then switched on. (See appendix)
- Analog output
Select Stereo, Dolby Surround, 3D Sound or Multi Channel. (See
appendix)
- Night Mode
Optimizes the dynamics of the sound with low volume playback.
- Speaker settings
Allows you to select speaker settings, volume balance and delay time
and to test the speaker settings.
Speaker settings are only active on the Analog Multi Channel Output.
(See appendix)
- Karaoke vocal
Put this setting to ON only when a multi channel karaoke DVD is
being played.The karaoke channels on the disc will then be mixed to a
normal stereo sound.
Language
Select the required Menu,Audio and Subtitle language. See ‘Virgin Mode’.
Audio language and Subtitle language can also be adapted via the Menu
bar on the screen.
PREPARATION 21