Filter
Top Products
27
Storing chapters/indexes
1 Press 4 on the selected chapter/indexes number.
➜ The chapter/indexes number will be
highlighted.
2 Use 2 and 1 to select the required chapter
number.
3 Press OK to confirm the selection.
➜ The selected chapter/indexes confirmation
will be added to the list of selections.
4 Press SYSTEM MENU to exit the VIDEO FTS
c menu.
Switching a Program ON/OFF
1 Use 34 to move and select desired tracks.
2 Press 2 or 1 to select either ON or OFF.
Erasing a selection in a Program
1 While playback is stopped, select VIDEO FTS
c in the menu bar.
2 Use 4 to select PROGRAM.
3 Use 2 and 1 to select the required number.
4 Press OK to erase the selection.
5 Press SYSTEM MENU to exit.
Erasing all selections
1 While playback is stopped, select VIDEO FTS
c in the menu bar.
2 Use 4 to select CLEAR ALL and press OK.
➜ All selections will be erased.
3 Press SYSTEM MENU to exit.
CD
Storing a Program
1 Load a disc and stop playback.
2 Press 4 to go to the list of available tracks.
3 Use 2 and 1 to select the required tracks or
directly using remote control numeric key.
4 Press OK to store the selected tracks.
➜ The track number will be added to the list of
selections.
Switching a Program ON/OFF
1 Use 34 to move and select desired tracks.
2 Press 2 or 1 to select either ON or OFF.
Erasing a track in a Program
1 Use 4 to go to the programmed tracks.
2 Use 2 and 1 to select the required number.
3 Press OK to erase the selection.
4 Press SYSTEM MENU to exit.
Erasing all selections
● Use 4 to select CLEAR ALL and press OK.
➜ All selections will be erased.
Note:
– Audio track programming function is not
available for MP3-CD and SACD discs.
Auto Wake-up Timer
The wake-up timer allows your player to turn on
after a preset time.
1 Select in the menu bar.
2 Press 4.
➜ Time edit box will appear.
3 Use the 3 or 4 to select the sleep time. The
maximum time you can select is 600 minutes.
Selection is made by 30 minutes steps each time.
4 Press OK to confirm the selection.
5 The Wake-up Timer will activate when the set is
switched to standby-mode.
Operation