Filter
Top Products
English
11
Connections
Optional: Connecting to a Multi-
channel Receiver
AUDIO
OUT
DIGITAL
OUT
FRONTREAR
CENTER
SUB-
WOOFER
MULTICHANNEL AUDIO IN
SUBW.
AV Receiver
REAR FRONT
CENTER REAR FRONT
LL
RR
Receiver has a Dolby Digital or DTS
decoder
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3 Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4 Set the DVD Player’s Analog Output to
‘Multichannel’ to enable playback of DVDs
recorded in Multi-channel. (see page 29
“Setting the analogue output”).
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Use the audio cables (white/red) to
connect [FRONT (L/R)] jacks of the DVD
Player to the corresponding AUDIO IN
jacks on the stereo system (cable
supplied).
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
FRONTREAR
CENTER
SUB-
WOOFER
AUDIO
IN
STEREO
DIGITAL
Optional: Connecting to an
Audio System
01-41 DVP3000K_93_RC2 26/09/05, 9:53 AM11