Filter
Top Products
English
37
Sound and Volume Controls
Setting the speakers’ channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup.
IMPORTANT!
The speaker settings only available on
Multi-channel audio outputs.
1 Press STOP then, press SYSTEM
MENU.
2 Press 2 repeatedly to select {AUDIO
SETUP PAGE}.
3 Press 34 to highlight {SPEAKER SETUP},
then press 2.
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
- - Audio Setup Page - -
Front Speakers Large
Center Speaker Small
Rear Speakers
Subwoofer
Speakers Volume
Speakers Delay
- - Speaker Setup Page - -
4 Enter its submenu by pressing 2.
5 Press 34 to highlight one of the options
below at a time, then press 2.
{FRONT SPEAKERS, CENTER SPEAKER,
REAR SPEAKERS}
OFF – when no speaker is connected.
LARGE – when connected speakers can
produce low frequency signals below
120Hz.
SMALL – when connected speakers
cannot produce low frequency signals
below 120Hz.
{SUBWOOFER}
ON – when a subwoofer is connected.
OFF – when no subwoofer is connected.
{SPEAKER VOLUME} – Volume level
setting for individual speakers (-6dB ~
+6dB).
Front Left
Front Right
Center
Subwoofer
Rear Right
Rear Left
0dB0
0dB0
0dB0
0dB0
0dB0
0dB0
- - Speakers Volume Setup - -
{SPEAKER DELAY} – Delay times setting
in relation to the listening position/
distance for centre and surround
speakers (1m ~ 10m).
Center
Subwoofer
Rear Right
Rear Left
1.0M
1.0M
1.0M
1.0M
- - Speakers Distance Setup - -
6 Press 1 2 to adjust the setting that best
suit your surround sound needs.
7 Press OK to confirm.
Helpful Hints:
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
01-41 DVP3000K_93_RC2 26/09/05, 9:54 AM37