Filter
Top Products
English
21
Operations for video playback
(DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
To select a playback feature or item
● Use 1 2 3 4 keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
To access or remove the menu
● Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
1 During playback, press ZOOM
repeatedly to display the picture with
different scales.
➜ Use 1 2 3 4 keys to pan through the
enlarged picture.
➜ Playback will continue.
2 Press ZOOM repeatedly to return to
the original size.
TIPS:
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Disc Operations
Resuming playback from the last
stopped point
Resume playback of the last 5 discs is
possible, even if the disc was ejected or
the power switched off.
● Load one of the last 5 discs.
➜ “LOADING” appears.
● During loadig mode, press PLAY/PAUSE
2; and the disc will be played back from
the last point.
To cancel resume mode
● In stop mode, press STOP 9 again.
Helpful Hint:
– This function is not possible on CD/MP3 disc.
Forward / Reverse Searching
1 Press 1 2 during playback to select the
required speed: 2X, 4X, 8X , 16X or 32X
(backward or forward).
➜ Sound will be muted (DVD/VCD) or
intermittent (CD).
2 To return to normal speed, press PLAY/
PAUSE 2;.
Slow Motion
1 Press 3 during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward {DVD/SVCD/VCD}).
➜ Sound will be muted.
2 To return to normal speed, press
PLAY/PAUSE 2; .
01-37_DVP3020_94_Eng_RC2 27/06/06, 1:28 PM21