Filter
Top Products
13
English
Switching the status display off or on
Along with the on screen menu,the status display also displays
information on the current operating status (counter, playback,
recording,TV channel, etc.) on the TV screen.You can switch
off the information about the operating status so that the
status display is not recorded when copying video tapes.
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select “VCR SET UP”,
then press B.
3 Press K/L to select “STATUS
DISPLAY”, then press B.
4 Press K/L to select “ON” or
“OFF”,then press B.
5 To end, press STATUS/EXIT.
Which settings can I choose?
“ON”: Shows the status display for a few seconds only.
“OFF”:Switches off the status display.
Blue Background on or off
I
f you want the TV screen to be solid blue when a weak signal is
received,set “BLUE BACKGROUND” to “ON”. The screen will
be blue and the sound will be muted.Or, if you want to receive
the weak signal,set “BLUE BACKGROUND” to “OFF”.
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select “VCR SET UP”, then press B.
3 Press K/L to select “BLUE
BACKGROUND”,then press B.
4 Select “OFF” (no blue background) or “ON” (blue background
on) with B.
5 To end, press STATUS/EXIT.
SELECT KL CHOOSE B
STATUS DISPLAY [ON]
→
BLUE BACKGROUND
[ON]
CLOCK DISPLAY [ON]
END=EXIT
Clock Display
This function allows you to switch the DVD/VCR display off.
It is useful in case you feel disturbed by the display-brightness
while watching TV in a dark room.It also reduces the power
consumption.
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select “VCR SET UP”,
then press B.
3 Press K/L to select “CLOCK
DISPLAY”, then press B.
4 Select “OFF” (no clock display) or
“ON” (clock display on) with B.
5 To end, press STATUS/EXIT.
SELECT KL CHOOSE B
STATUS DISPLAY [ON]
BLUE BACKGROUND
[ON]
→CLOCK DISPLAY [ON]
END=EXIT
• Reception of stereo broadcasts:
STEREO
LEFT
RIGHT
NONE
Display on
the TV screen
Mode
Stereo
L
R
Monaural
L Audio
R Audio
L Audio
L Audio
R Audio
R Audio
L
+R Audio
L+R Audio
L
R
L
R
L
R
L
R
AUDIO OUTPUT
• During playback of the recorded video tape
in Hi-Fi mode:
Mode
Stereo
L
R
Monaural
MIX
STEREO
LEFT
RIGHT
MONO
MIXED
Display on
the TV screen
Hi Fi L Audio
Hi Fi R Audio
Hi Fi L Audio
Hi Fi L Audio
Hi Fi R Audio
Hi Fi R Audio
Normal Audio
Normal Audio
Hi Fi L Audio
+
Normal Audio
Hi Fi R Audio
+
Normal Audio
L
R
L
R
L
R
L
R
L
R
AUDIO OUTPUT
Selecting the sound channel
You can select the desired sound channel during playback or
while receiving TV channels via the DVD/ VCR.This allows you
to select a desired language for multi-language transmissions.
1 Press AUDIO.This will show the current sound setting.
2 Press AUDIO repeatedly until the desired setting appears in
the display.
• During reception of bilingual broadcasts:
Display on
the TV screen
Mode
MAIN
SUB
MAIN
SUB
MAIN
SUB
MAIN
SUB
Main Audio
Main Audio
Sub Audio
Sub Audio
Main Audio
Sub Audio
L
R
L
R
L
R
AUDIO OUTPUT
SELECT KL CHOOSE B
→STATUS DISPLAY [ON]
BLUE BACKGROUND
[ON]
CLOCK DISPLAY [ON]
END=EXIT
Basic Playback
Getting Started
Turn on the power of the TV,amplifier and any other
components which are connected to the DVD/VCR.
Make sure the TV and audio receiver (commercially available)
are set to the correct channel.
1 Press STANDBY-ON
yy
.
2 Press DVD,then OPEN/CLOSE A to open disc loading tray.
3 Place the chosen disc in the tray,with the
label facing up.
4 Press PLAY
BB
.
•
The tray will close automatically, and
playback will then start from the first
chapter or track of the disc.If the playback
does not start automatically,press
PLAY B.
•
When you playback the DVD which a title menu is recorded,it
may appear on the screen.In this case,refer to Title Menu.
5 Press STOP C to stop playback.
Notes:
- A “prohibited icon”may appear at the
top-right on the TV screen during
operation,warning that a prohibited
operation has been encountered by the
DVD/VCR or the disc.
- With DVDs that use some titles for playback program
signals, playback may start from the second title,or it
may skip these titles.
Playing a Disc
DVD-V
VCD
CD
MP3
JPEG
Windows
Media
TM
Audio
Cancelling and Calling Back PBC Function
When playing Video CDs with PBC function, some operations
(e.g. select and repeat tracks) cannot be performed unless the
PBC function is cancelled temporarily.
1 Insert a Video CD.
• Title menu will appear on the display.
• Playback will start automatically.
2 Press STOP C.
3
Press the numerical key pads to enter the desired Track number.
• PBC function is now cancelled and the playback of the Video
CD will start.
4 To call back PBC function, press STOP C twice
,and then press
PLAY B.
VCD
- During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
- DVDs recorded with the NTSC system can playback with
this unit via a PAL system TV set.
- Depending on the TV,when playing back a NTSC DVD
on a PAL TV,the picture may roll up or down,shrink
vertically and black bars may appear at the both top
and bottom of the screen.
- It may take a time to deliver the picture or the sound.
This is not a malfunction.
- A disc may not play properly if the Disc's recorded area
is less than 55mm across.
- Unfinalized discs will not play on this unit.
- Do not glue paper or put stickers on to the Disc.These
may damage the Disc,and this player may not read it
correctly.
Other Functions
H9924RD_EN_0316 3/17/05 10:11 AM Page 13