Filter
Top Products
Windows
Media
TM
Audio
Windows
Media
TM
Audio
Windows
Media
TM
Audio
Windows
Media
TM
Audio
14
English
Zoom
The Zoom function allows you to enlarge the video image and
to pan through the enlarged image.
1 Press ZOOM during playback.
• Playback will continue.
2 Press ZOOM repeatedly to select the required zoom factor:
x2,x4 or OFF.
3 Press K / L / s / B to move the zoomed picture across the
screen.
4 To exit zoom mode,press ZOOM to OFF.
Notes:
- If you press OK while in the zoom mode,the zoom posi-
tion window appears at the bottom-right on the TV
screen.If you press it again,that (the zoom position)
window disappears.
-
Zooming function does not work while disc menu is shown.
- x4 zoom is not available on some discs.
- only x2 zoom is available on Video CDs and JPEG CDs.
- Position guide is not available for JPEG playback.
DVD-V
Track Search
There are three ways to begin the playback of a specific track.
Using the Numerical key pads
1
Press the numerical key pads to enter the desired Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9),press a single number (e.g.To play
track 3,press 3).
•
To play track 26,press +10,2,6. (Each number must be pressed
within 30 seconds of the previous number.)
Using SEARCH MODE
1 Press SEARCH MODE.
• The Track Search display appears.
2 Within 30 seconds,select a desired track number using the
numerical key pads. For single or two digit track number, press
0 first.
• Playback will start at the selected track.
Using3 buttons.
During playback,press
3
to move to the next track. Press it repeatedly
to skip subsequent tracks. Press to go back to the beginning of the
current track.Press it repeatedly to go back to the previous tracks.
•
Track number will appear briefly on the front panel display.
• If 3 is pressed while the playback is paused,the playback will
be paused again after skipping to the next track.
Note:
- 3
are not available when playback is stopped.
- 3
only affect MP3 tracks during Dual Playback.
CD
Title Menu
1 Press DVD,then TITLE.
• The title menu will appear.
2 If the feature is not available,“ ” symbol may appear on the
TV screen.
3 Press K / L / s / B to select an item, and OK to confirm
selection.
• Playback will begin at the selected Title.
1 Insert a Video CD.
2 The title menu will appear.
3 Press numerical key pads to select the menu.
• Playback will start.
VCD
Playing a Disc
Disc Menus
1 Press DVD,then DISC/VCR MENU.
• The DVD main menu will appear.
2 If the feature is not available,“ ” symbol may appear on the
TV screen.
3
If disc menu is available on the disc,audio language,subtitle options,
chapters for the title and other options will appear for selection.
4 Press K / L / s / B to select an item, and OK to confirm
selection.
DVD-V
DVD-V
Calling Up a Menu During Playback
• Press DISC/VCR MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
Note:
- Contents of menus and corresponding menu operations
may vary between discs.Refer to the manual
accompanying the disc for details.
DVD-V
Step by Step Playback
1 During playback,press PAUSE k.
• Playback will pause and sound will be muted.
2
The disc goes forward by one frame each time PAUSE
F
is pressed.
3 To exit step by step playback,press PLAY B.
Note:
- Set “STILL MODE” to “FIELD”in the DISPLAY menu if
pictures during step by step playback are blurred.
(Refer to
Display Setting
.)
DVD-V
Resume
1 During playback,press STOP C.
• Resume message will appear on the TV screen.
2 Press PLAY B,playback will resume from the point at which
playback was stopped.
• To cancel resume, press STOP C twice.
Notes:
- For MP3,JPEG and Windows Media™ Audio Tracks,
playback will resume from the beginning of the track at
which playback was stopped.
- The resume information will be saved even when the
power is turned off.
DVD-V
Fast Forward / Reverse Search
1 During playback,press g or h repeatedly to select the
required forward or reverse speed.
• For DVDs and Video CDs,fast forward or reverse search
speed is different depending on the disc.
• For DVDs,approximate speed is 1 (x2),2 (x8), 3 (x20),
4 (x50),and 5 (x100).
• For Video CDs,Audio CDs, MP3 or Windows Media™ Audio
playback,approximate speed is 1 (x2),2 (x8), and 3 (x30).
2 To r eturn to normal playback,press PLAY B.
Notes:
- If you use
gor h
during Dual
Playback,JPEG playback will be paused.
DVD-V
VCD
MP3
VCD
CD
VCD
VCD
VCD
CD
MP3
JPEG
JPEG
MP3
JPEG
Slow Forward / Slow Reverse
1 During playback,press PAUSE k.
2 Press g or h .
•
Slow motion playback will begin and sound will be muted.
3 Press g or h repeatedly to select the required speed.
Slow forward or reverse speed varies with the disc.
Approximate speed is 1 (1/16),2 (1/8), and 3 (1/2).
4 To r eturn to normal playback,press PLAY B.
Notes:
- Slow Reverse is not available on Video CDs.
- Set “STILL MODE” to “FIELD”in the DISPLAY menu if
pictures in the slow motion playback mode are blurred.
(Refer to
Display Setting
.)
DVD-V
VCD
General Features
DVD or Video CDs may contain menus to navigate the disc
and access special features.Press the appropriate numerical key
pads or use K / L / s / B to highlight your selection in the
DVD main menu and press OK to confirm.
Note:
- Unless stated,all operations described are based on
remote control use.Some operations can be carried out
using the menu bar on the TV screen.
DVD-V
VCD
Pause
1 During playback,press PAUSE k.
• Playback will pause and sound will be muted.
• Pressing PAUSE F once during Dual Playback will pause a
JPEG file only.Pressing PAUSE F one more time will pause an
MP3 track.
2 To continue playback,press PLAY
BB
.
Note:
-
Set “STILL MODE” to “FIELD”in the Display menu if pictures
in the pause mode are blurred.(Refer to Display Setting.)
DVD-V
VCD
CD
MP3
JPEG
H9924RD_EN_0316 3/17/05 10:11 AM Page 14