Philips DVP3200V/37B DVD VCR Combo User Manual


 
English
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack
of your DVD/VCR.
2
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL
AUDIO IN jack on the Stereo.
This digital audio connection only provides sound for the DVD player of the DVD/VCR.
So, in order to use the VCR features or hear TV channels at the DVD/VCR, you still
need to either connect the RF coaxial cable between the ANT-OUT jack of the
DVD/VCR and the TV’s Antenna In jack, or connect the supplied red/white audio cable.
To connect the supplied RF coaxial cable, see step 2 on page 9.To connect the red/white
audio cable, see step 2 on page 12.
3
Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use
component video cable or S-Video cable instead for the DVD player,see
page 12.You will still need the yellow video cable or RF coaxial cable for VCR
features.
4
Plug in the power cords of the Stereo,TV and DVD/VCR.Turn on the
Stereo and select its Auxiliary IN channel.Turn on the TV and set it to
the correct Video In channel. Go to your TV’s lowest channel (01 or 02) and
change channels downward until you see DVD or VCR material on the TV screen.
To help you find the right Video In channel on the TV,turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode.With no disc in the player,a large DVD
Video logo will appear on the TV screen when you get the TV on the correct Video
In channel.
Make sure
Progressive Scan (PROG. SCAN)
is OFF and P.SCAN does not appear on
the DVD/VCR’s display panel. Disable
Progressive Scan either in the DISPLAY
menu or by pressing and holding PLAY B (DVD) on the front of the
DVD/VCR for more than 5 seconds.
Details are on pages 8 and 61.
5
You are ready to turn on the DVD/VCR.Go to page 16 before turning on
the DVD/VCR.
Remember...
Some DVDs are recorded in Dolby Digital Multi-channel Surround Sound. Select Dolby
Digital Multi-channel Surround Sound in the DVD disc menu. If Dolby Digital Surround
Sound is not recorded on the disc, you will not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBYDIGITAL to
BITSTREAM in the DVD player’s Setup menu. Details are on page 62. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo, set DOLBYDIGITAL to PCM.
Incorrect settings may cause noise distortion and damage the speakers.
14 Hookups (cont’d)
DVD/VCR to a
TV and to a Stereo that is Dolby Digital-compatib
le
Using Digital Audio connections
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
L
R
L
R
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
AUDIO OUT
DVD/VCR
VCR
ANT
-
IN
ANT-OUT
VIDEO OUT
AUDIO IN
VIDEO IN
C
R
/
P
R
VIDEO IN
COAXIAL
DIGITAL
AUDIO IN
2
3
Back of TV
(example only)
Stereo
Antenna/Cable TV Signal
1
E8A21UD_EN1 5/29/06 3:13 PM Page 14