Filter
Top Products
Before Operation - VCR part
13
Setting the clock Manually
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when your DVD+VCR detects
a channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1
Press SETUP.
Press b or B to select SET.
Press OK.
The auto adjust mode mode can be set to ‘OFF’ by
pressing OK if you want to set the time manually.
2
Use 3 or 4 on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
3
If you make a mistake press
bb
or
BB
and enter the
correct details.
4
Press SETUP.
To set the colour system
1
Press SETUP.
2
The main menu will appear on the TV screen.
3
Press 1 or 2 to select the SYS and press OK.
4
Press 3 or 4 to select according to the COLOUR
system used.
5
Press 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
6
Press SETUP to remove the menus from the TV
screen.
OSD
ON
OFF
OSD
f
REC
i
Pr-12
ACMS
P
SET
R
SET
SYS
SYS
NIC
DECO-
DER
+
-
AUD
RF - I/I
RF - B/G
RF - D/K
REC
i
Pr-12
ACMS
P
SET
R
12
SET
SYS
SYS
OSD
ON
OFF
OSD
f
NIC
DECO-
DER
+
-
AUD
AUTO
PAL
MESECAM
HH MM DD MM YY
:..00 1 01 07 MON
12
SET
8
ACSS : OFF
i
OK
HH MM DD MM YY
:..- -
- -
- - - -
- - - - -
ACSS : ON
i
12
SET
OK