Filter
Top Products
23
Operation with tape (Continued)
VIDEO Plus+ Programming
VIDEO Plus+ greatly simplifies entering the date, channel,
start and end times of a Timer Recording by simply
entering a PlusCode. PlusCodes are published in most TV
guide magazines; they can vary one to nine numbers in
length.
1
Make sure that TV channels have been tuned.
Insert a video cassette with protection tab into your
VCR.
2
Press VIDEO PLUS+.
3
Press the numbered buttons to enter the PlusCode
of the TV programme that you wish to record.
If you make a mistake press 1 then enter the revised
number.
4
Press OK.
If PLEASE CHECK is displayed it means that you have
entered the wrong PlusCode, entered the PlusCode
incorrectly.
If “- -” is displayed, you have to enter the programme
number of the station, you want to record from.
5
Press 1 or 2 to select the settings that you wish to
revise. (PR, DATE,TIME and SP).
Press 3 or 4 to enter the correct information.
6
Press 3 or 4 to switch PDC on or off.
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP, IP, or
LP).
IP mode determines how much tape is left and switches
speed from SP to LP, if necessary, to complete recording
the program.
IP mode cannot be selected when PDC is ON.
Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN on
the front or from either of the EURO SCART sockets on
the back of VCR, press INPUT to select for correct
display (AV1,AV2 or AV3).
7
If you want to make another VIDEO Plus+ recording
repeat stages 2 - 6.
Press SETUP twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the data.
Press
11
to switch your VCR power off mode.
will appear in the video recorder’s display while
your VCR waits to make the recording.
To watch a DVD during timer recording standby mode,
press POWER and DVD to switch to DVD mode.
8
Press POWER
11
to end recording.
Note
Programme Delivery Control (PDC)
The Programme Delivery Control (PDC) ensures that the
TV programmes that you have programmed for timer
recording will be recorded exactly from their beginning to
end, even if the actual broadcasting time differs from the
scheduled time due to delayed start, or if the programme is
extended beyond its scheduled time.Also, if a programme is
interrupted, for example, if a news flash is inserted, the
recording will also be interrupted automatically and resumed
when the programme continues.
The PDC signal is broadcast by the TV station and this
controls the timer in the video recorder.
PDC should be set ON for all timer recordings from TV
stations broadcasting these signals. It should be set OFF for
all timer recordings from TV stations that are not
broadcasting these signals.
DELETE :
OK
i
0~9,
VIDEO PLUS+ CODE NO.
246876543
REC
OK
i
0~9,
VIDEO PLUS+ CODE NO.
- - - - - - - - -
REC