Philips DVR2104 DVR User Manual


 
16
Disk Full Information
The disk is full. If recording needed, choose one of the
following steps:
n Set auto overwriting mode
n Empty disk
n Change disk
Pressclearto stop the buzzer ringing and exit
Status
5. Alert setting
Move the cursor to alert setting, and press è to enter the following window:
1. Alert setting is used to set the alert mechanism and the working
parameter of the alert.
2. Time before/after: it is to set the length of the recording before/after the
alert.
3. Beg. Switch delay: it is to set the period of time for switching when the
alert begins.
4. End. Switch delay: it is to set the period of time for switching after the
alert finishes.
5. Alert input delay: it is to set the period of time for alert output. The
window default is 99 minutes. The user has to clear the alert manually,
otherwise the buzzer will continually ring when there is something
special.
6. Alert delay: after pressing guard, the system will function only in the set
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn