Philips DVR5100 DVR User Manual


 
27
English
Recording (continued)
¥
F Press OK to con rm the selection.
G Press Yellow button.
{ Timer Recording } appears.
You can set the new timer setting
while in the Timer Recording List screen.
Press Green button to display the
help menu.
To change or cancel the other settings,
repeat steps 2 and 3.
When the end time of one
recording and the start time of
another are the same
While recording two programmes (A, B),
the recording (C) may be delayed after
 nishing the previous recording (B).
7:00 9:00 10:00
B
A
C
To turn off the Timer List
Press TIMER or BACK.
Helpful Hint:
While recording, you cannot modify the timer
setting for the current recording.
About simultaneous two-channel
recording and priorities
You cannot use the live TV pause
function while recording two channels.
You cannot perform Timer Recording
while doing two recording.
The function will start as soon as possible
when recording stops.
You cannot tuning, other than
recorded channels, when two tuners are
occupied in recording.
When three recordings overlap
The recording that starts earlier has
priority.
When the start time is the same, manual
recording has priority over a timer
recording.
Recording Time
Recording time differs depending on
whether the recorded programme is HD
(High De nition) or SD (Standard
De nition) signal. Note that the
recording times in the following table are
approximate and that actual times may
differ.
Note also that the maximum continuous
recording time for a single title is six
hours. Contents beyond this time will not
be recorded.
Recording time (hours)
DVR7100 DVR5100
HD only
(15 Mbps)
36 hours
(Approx.)
23 hours
(Approx.)
SD only
(8 Mbps)
69 hours
(Approx.)
44 hours
(Approx.)
The above recording time is approximate,
and may be different depending on the
amount of data of the programme.