Filter
Top Products
15Use of the menus
Headphone volume
This control allows you to adjust the volume level of the headphone.
Surround mode
Only selectable with a Cinema Link configuration. See separate booklet supplied.
Dependent on the Cinema Link configuration and the sound signal
broadcasted, select one of the Surround modes.
Dual I-II (Only available with dual sound transmission)
This control allows you to switch from
Language I or Language II during
dual sound transmission.
Your selection is stored per TV channel.
Mono/Stereo (Only selectable in case of analogue stereo transmission)
Select
Mono or Stereo with the cursor left/right.
When
Stereo has been selected, the television will reproduce any stereo
broadcast signal it receives.
If Stereo is not present on a selected programme and the TV is placed in
Stereo mode, the sound coming from the set will remain monaural.
Your selection is stored per TV channel.
Nicam/Analogue (Only selectable in case of Nicam transmission)
Select
Nicam or Analogue if the TV channel transmits digital sound.
In case of weak digital sound signals, due to the transmission, select Analogue.
Your selection is stored per TV channel.
Night mode
Only selectable with a Cinema Link configuration. See separate booklet supplied.
Audio only
Only selectable with a Cinema Link configuration. See separate booklet supplied.
Smart sound
This menu item performs the same as the Smart sound M key on the remote
control. See Use of the remote control, p. 12.
Smart settings will be set to
Personal if the following settings are changed
manually: treble and bass.
Sound
Volume
Treble
Bass
Balance
Headphone volume
(Surround mode)
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(Night mode)
(Audio only)
Smart sound
TV
1003.5 en 04-03-2003 09:13 Pagina 15