Filter
Top Products
44
3139 246 14793
English
Changing tuning grid (not available
for all versions)
In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz (9 kHz in some
areas). The preset frequency step in the
factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all
previously stored preset radio
stations.
STANDBY ON
SOURCE
PLAY/PAUSE
1 Press TUNER on the remote (or press
SOURCE control on front panel) to
select “FM” or “MW”.
2 Press STANDBY ON to switch the
DVD system to standby mode.
3 While holding down SOURCE and S
PREV on the front panel, disconnect and
connect the power cord to the power
supply again.
➜The display will show "GRID 9" or
"GRID 10".
Helpful hints:
– GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.
– The FM tuning grid also will be changed
from 50 kHz to 100 kHz or vice versa.
Tuner Operations (continued)
001-051-hts5500-55-Eng3 05/04/05, 4:18 PM44