Filter
Top Products
15
English
ö Speakers
Allows you to select speaker settings, volume balance, delay
time and to test the speaker settings.
You can also adjust the volume balance via the
SUBW +/-, REAR +/-, CENTER +/-
buttons on the remote control.
Notes:
– Speaker settings are only active on the Multi-Channel Audio
outputs for both DVD and SACD. Speaker settings will not be
applied during playback in the SACD Stereo mode.
– The test tone will be automatically generated. To help you
judge the sound level of each speaker, the left front speaker is
always on during the setting process.
1en
1en
st1
ö PCM Output
If you connected the DVD system to an external
equipment using the DIGITAL OUT jack, you may need to
adjust the PCM output setting.
Select 96 KHZ if the external equipment is capable of
processing digital signal input with sampling rates of 96 kHz.
Select 48 KHZ if the external equipment is incapable of
processing 96 kHz digital signal input, and you need the
system to convert sound to a standard signal with sampling
rates of 48 kHz.
Setting the language
Audio Language
Subtitle
Menu
English
English
English
1en
1en
st1
ö Audio Language, Subtitle, Menu
This is to select the audio language, subtitle language and
the language used on TV screen menus or DVD menus that
will always be used for every disc to be played back. The
default setting is English.
If the language selected is not available on the disc, the
original language designated by each disc will be selected.
PREPARATIONS
Setting the features
Access control
Status window
PBC
On
Enter code...
On
1en
1en
st1
On
Help text
ö Access Control (see next page)
ö Status window
If you select On, the current status of the system will be
displayed on the TV screen.
ö PBC (Playback Control – VCD only)
If you select On, when playing a video CD with playback
control function, the PBC menu (if available) will appear on
the TV screen for selection.
If you select Off, the video CD will play automatically once
it is loaded in the disc tray.
This function can also be accessed via the
DISC MENU button on the remote control.
ö Help text
If you select On, the help text will appear to describe the
menu bar icons selected.