Philips MCD106 DVD Player User Manual


 
6
English
Step 2: Connecting the power
cord
IMPORTANT!
Never make or change any
connection with the power switched on.
After everything is connected properly, plug in
the AC power cord to the power socket.
Note:
Refer to the type plate on the rear or bottom
of the system for identification and supply ratings.
Step 3: Connecting to a stereo
system
Stereo system has Dolby Pro Logic or
right/left Audio In sockets
Use the supplied composite video cable (yellow)
to connect the system’s COMPOSITE VIDEO
jack to the video input jack (or labeled as A/V In,
Video In, Composite or Baseband) on your TV.
Use the audio cables (white/red) to connect
LINE OUT (L/R) jacks to the corresponding
AUDIO IN jacks on the stereo system.
Connections
0&'BB,)8BYBSGI 
0&'BB,)8BYBSGI 
0&'BB,)8BSGI 
0&'BB,)8BB&&5SGI 