Filter
Top Products
5
English
Connections
Step 1: Connecting TV set
IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– Connect the system directly to the
TV set.
Using Video In jack (CVBS)
• Use the supplied composite video cable (yellow)
to connect the system’s COMPOSITE VIDEO
jack to the video input jack (or labeled as A/V In,
Video In, Composite or Baseband) on the TV set.
• To listen to disc playback of the system through
the TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks to the
corresponding AUDIO IN jacks on the TV set.
Using an accessory RF modulator
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
• Use the supplied composite cable (yellow) to
connect the system’s COMPOSITE VIDEO jack
to the video input jack on the RF modulator.
• Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
0&'BB,)8BYBSGI
0&'BB,)8BYBSGI
0&'BB,)8BSGI
0&'BB,)8BB&&5SGI