23
10 Product
information
Note
Product information is subject to change
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated output power 2 X 5 W RMS
Frequency response 60 - 16 kHz, ±3 dB
Signal to noise ratio >65 dB
Aux input 0.5 V RMS 20 kohm
Disc
Laser type Semiconductor
Disc diameter 12 cm/8 cm
Video decoding MPEG-2/MPEG-1
Video DAC 10 bits
Signal system PAL/NTSC
Video format 4:3/16:9
Video S/N 56 dB (minimum)
Composite video
output 1.0 Vp-p, 75 ohm
S-Video output Y- 1.0 Vp-p, 75 ohm
C- 0.286 Vp-p, 75 ohm
Audio DAC 24 bits / 96 kHz
Total harmonic
distortion <1%
Frequency response 4 Hz - 20 kHz (44.1kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 44 kHz (96 kHz)
Total harmonic
distortion < 0.1% (1 kHz)
Channel separation 40 dB minimum (1 kHz)
S/N ratio >65 dBA
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the »
display shows
.
To deactivate sleep timer
1 Press SLEEP repeatedly until [OFF] is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Listen to an external device
You can listen to an external device through
this unit.
1 Press MP3 Link to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
MP3 Link jack (3.5 mm) on the unit
the headphone jack on an external
device.
3 Start to play the device (see the device
user manual).
English
EN