Filter
Top Products
English
15
Connections
Step 5: Connecting the power
adaptor
IMPORTANT!
–Never make or change any connection
with the power switched on.
After everything is connected properly, connect
the AC power adaptor to the system and then
to the power outlet.
Optional: Connecting additional
equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
–When making connections, make sure
the colour of cables matches the colour
of jacks.
–Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
AUDIO OUT
L
R
A
Listening to the playback of other
equipment A
Use a cinch cable to connect AUX on the rear
panel of the DVD player to the analogue audio
out terminals of an external equipment (TV, VCR,
Laser Disc player, DVD player or CD Recorder).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX left terminal. Alternatively, you can use a
“single to double” cinch cable (the output sound
still remain mono).
AUDIO IN
L
R
VIDEO IN
L
B
Using the VCR for recording DVDs B
Connect one of the system's VIDEO OUT
jacks to the corresponding VIDEO IN jack and
LINE OUT (R/L) jacks to the AUDIO IN jacks
on the VCR. This will allow you to make analogue
stereo (two channel, right and left) recordings.
pg001-pg035_MCD119-12-Eng 2007.8.13, 11:0615