Filter
Top Products
10
2 Insert the stripped part of the wire
completely.
Insert the right speaker wires to “ • R ”,
left speaker wires to “ L ”.
Insert the red wires to “ • + ”, black
wires to “ - ”.
3 Release the socket Á ap.
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: Connect through
composite video
1 Connect the supplied composite video
cable to:
the • VIDEO OUT socket on this unit.
the video input socket on the TV.•
abc
TV
3 Connect
Place the unit
1 Place the unit near to the TV.
2 Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
To avoid magnetic interference or unwanted •
noise, never place this apparatus and speakers
too close to any radiation devices.
Never place this unit in an enclosed cabinet. •
Install this unit near the AC outlet where the •
AC power plug can be easily reached.
Connect speakers
Note
Ensure that the colors of the speaker wires and •
terminals are matched.
For optimal sound, use the supplied speakers •
only.
Connect only speakers with impedance that is •
the same or higher than the supplied speakers.
Refer to the SpeciÀ cations section of this
manual.
1 Hold down the socket Á ap.
EN
BLQGHVLJQ[POLQGE6HFBLQGHVLJQ[POLQGE6HF