Filter
Top Products
English
13
Step 3: Antenna connection
Connect the supplied FM antenna to the
respective terminal. Adjust the position of the
antenna for optimal reception.
FM Antenna
● For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– Connect the DVD system directly to
the TV.
Using Video In jack (CVBS)
1 Use the composite video cable (yellow) to
connect the system's VIDEO jack to the video
input jack (or labelled as A/V In, Video In,
Composite or Baseband) on the TV set.
2 To hear the sound of this DVD Player through
your TV, use the audio cables (white/red-not
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on the TV.
Connections
Step 2: Connecting speakers
and subwoofer
1 Connect the supplied DB15 cable to DVD
player’s DB15 CONNECTOR TO
SPEAKER jack and the Subwoofer’s DB15
CONNECTOR TO MAIN UNIT jack.
● Fix the two screws on each connector to ensure
firm connection.
2 Connect the speaker wires to the SPEAKER
terminals on the subwoofer, right speaker to "R"
and left speaker to "L", coloured (marked) wire
to "+" and black (unmarked) wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
–For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
1.000
DB15 CONNECTOR
TO MAIN UNIT
SPEAKERS 4
1.000
pg001-pg039_MCD149-12-Eng 2007.9.13, 15:3513