Philips MCD288 Home Theater Screen User Manual


 
35
English
Radio Reception
Tuning to radio stations
1 Press SOURCE on the set repeatedly or
TUNER on the remote to select FM tuner
source.
2 Press and hold TUNING 22/33 (2/3 on
the remote) and release the button.
The radio automatically tunes to a station
with sufficient reception.
3 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press TUNING
22/33 (2/3 on the remote) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Press PROGRAM for more than three
seconds to activate programming.
All available stations are programmed.
AUTO is displayed and available stations are
programmed in order of waveband.
Manual programming
1 Tune to your desired station (refer to “Tuning to
radio stations”).
2 Press PROGRAM to activate programming.
PROG flashes on the display.
3 Press PRESETí/ë to allocate a number
from 1 to 20 to this station.
4 Press PROGRAM again to confirm the setting.
PROG disappears.
5 Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
Press PRESETí/ë until the desired preset
station is displayed.
pg025-pg044_MCD288-22-Eng-B 2006.3.10, 17:1635