Filter
Top Products
English
29
Problem
Solution
Left and right sound outputs are
reversed.
The remote control does not function.
Wireless connection with the subwoofer
fails
The timer is not working
The Clock/Timer setting is erased
Unable to select Progressive Scan.
Some files on the USB device are not
displayed.
“DEVICE NOT SUPPORTED” scrolls on the
display.
✔ Check the speaker connections and location.
✔ Point the remote control at the remote control
sensor of the unit.
✔ Reduce the distance to the player.
✔ Remove any possible obstacles.
✔ Replace the batteries with a new ones.
✔ Check that the battery is loaded correctly.
✔ Ensure that the subwoofer is powered on.
✔ The distance between the main set and
subwoofer may exceed the maximum range of
wireless communication. Move the subwoofer
closer to the main set.
✔ Obstacles may exist between the main set and
subwoofer. Remove the obstacles.
✔ Strong interference may exist. Ensure there is no
strong interference that may impair the
communication between the main set and
subwoofer.
✔ If the problem remains, see “Installation - Step 1:
Connecting speakers - Connecting the wireless
subwoofer” for manual pairing.
✔ Set the clock correctly.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔ Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
✔ Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔ Remove the USB mass storage device or select
another source.
Troubleshooting
pg017-pg029_MCD289-58-Eng-B 2008.2.21, 14:4229