Philips MCD515 DVD Player User Manual


 
15
English
FM Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
Connect the DVD system directly to
the TV.
Using component Video In jack (Cr Cb
Y)
3
AUX/
CDR IN
R
LINE OUT
DIGITAL
OUT
L
RL
AM ANTENNA FM ANTENNA
1
2
Connections
Step 2: Connecting speakers
1
2
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-". Fully insert
the stripped portion of the speaker wire into the
terminal as shown.
Notes:
Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
–For optimal sound performance, use the
supplied speakers.
Do not connect more than one speaker to any
one pair of +/- speaker terminals.
Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Step 3: Antenna connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
AM
Position the antenna as far as possible from a TV,
VCR or other radiation source.
pg001-pg042_MCD515-37-Eng 2006.2.27, 16:2015